USB Stick Intall Problem (UEFI) 24.01.1

[deFrisselle]

Tried installing from a UBS stick but there seems to be an issue with UEFI with my laptop
Changing to Legacy BIOS gets it installed
The previous version had no issue with UEFI

Trying to install 24.01.1 BTW

Screenshot of previous install with laptop specs

With UEFI this is what happens

[chadbsd]

Disable legacy bios.

[wb7odyfred]

No need to reinstall, Achim. "Does not work" , leaves out information to diagnose the problems.

open a terminal window and use these BSD commands
camcontrol devlist
geom dev list
gpart status
gpart show -lp
on the EFI ESP partition, mount it to examine the files.
su -
mkdir -p /mnt/esp
mount -t msdosfs /dev/ada0p1 /mnt/esp
ls -lh /mnt/esp
tree /mnt/esp

* dont have command tree?
pkg install tree

[deFrisselle]

This is on the Legacy BIOS installed 24.01.1

quote=wb7odyfred post_id=11910 time=1710176223 user_id=523]
No need to reinstall, Achim. "Does not work" , leaves out information to diagnose the problems.

open a terminal window and use these BSD commands
camcontrol devlist[/quote]

<SanDisk SDSSDH3512G X6107000> at scbus0 target 0 lun 0 (pass0,ada0)
<PLDS DVD-RW DA8AESH XL61> at scbus1 target 0 lun 0 (pass1,cd0)
<SanDisk Ultra 1.00> at scbus2 target 0 lun 0 (da0,pass2)

geom dev list
gpart status

Name Status Components
ada0p1 OK ada0
ada0p2 OK ada0
ada0p3 OK ada0
da0p1 OK da0
da0p2 OK da0
iso9660/GHOSTBSDp1 OK iso9660/GHOSTBSD
iso9660/GHOSTBSDp2 OK iso9660/GHOSTBSD

gpart show -lp
on the EFI ESP partition, mount it to examine the files.
su -
mkdir -p /mnt/esp
mount -t msdosfs /dev/ada0p1 /mnt/esp
ls -lh /mnt/esp
tree /mnt/esp

* dont have command tree?
pkg install tree

Corrected my initial post and title Just trying to get the latest release installed the in place upgrade broke the 13.2 install so was trying to go with a fresh install of 14

[chadbsd]

Are you using ZFS or UFS?

[deFrisselle]

ZFS I assume
However, the Install ISO is set up

USB stick only boots fully to the desktop when the laptop is set to Legacy BIOS mode
When set to UEFI mode I get the bottom image in my original post

I was running 13.2-Stable on this Lenovo ideaPad 300
Which was a UEFI install