iwlwifi on BSD

Help with setting up network cards, including WiFi cards.
RodMyers
Posts: 87
Joined: Sat Nov 27, 2021 8:16 pm

Re: iwlwifi on BSD

Post by RodMyers »

success, finally got everything in the correct place. The following is my /etc/rc.conf

# for internal wifi card
if_iwlwifi_load="YES"
legal.intel.license_ack=1
wlans_iwlwifi0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
create_args_wlan0="wlanmode sta regdomain FCC country US"
# wlandebug_wlan0="+state +crypto +node +auth +assoc +dot1xsm +wpa"
ifconfig_iwlwifi0="DHCP"
#
Hagg
Posts: 17
Joined: Sat Mar 05, 2022 6:26 pm

Re: iwlwifi on BSD

Post by Hagg »

ericbsd wrote: Mon Jan 31, 2022 6:56 am I added the iwlwifi in devd.conf to set up and start at boot.

The driver is not perfect, but it is a start in the right direction.
I've been attempting to get wifi on the latest build of GhostBSD both XFCE and Mate (22.03.01) with no luck at all. So... is tlhe iwlwifi issue still up in the air? I cannot test network obviously on the live DVD as it cannot see the network card, so have to install then struggle with it but have not been able to get it going?

I posted a thread in the Hardware section and was directed here.

*Hagg*
RodMyers
Posts: 87
Joined: Sat Nov 27, 2021 8:16 pm

Re: iwlwifi on BSD

Post by RodMyers »

look at the #2 post from @ericbsd

Make sure you are using the latest ISO. Initially I missed step and I had issues. I do have it running by following his steps
Hagg
Posts: 17
Joined: Sat Mar 05, 2022 6:26 pm

Re: iwlwifi on BSD

Post by Hagg »

RodMyers wrote: Sun Mar 06, 2022 1:29 pm look at the #2 post from @ericbsd

Make sure you are using the latest ISO. Initially I missed step and I had issues. I do have it running by following his steps
Thank you. Yes as I posted, I'm using an iso that was released March 2nd. I'll dig in and try as you say.
Hagg
Posts: 17
Joined: Sat Mar 05, 2022 6:26 pm

Re: iwlwifi on BSD

Post by Hagg »

So I gather there is no way an iso can appear here that will have the networking via iwlwifi issue resolved? I'd like to try it before installing.
Post Reply