GhostBSD 24.07.3
just downloaded the iso (both the mate and xfce), tried to install on nvme partition alone side with windows.
I notice that in the mate iso, when I click custom/manual partition installation button, it locks up for about 40 seconds , both keyboard and mouse lost response. But it continues eventually.
Installation completed and booted into the de fast.
However within the de it locks up randomly like a few mintues a time. Both the mate edition and the xfce edition.
Some lock ups it seems its only the keyboard/mouse being dead, the system is still going on because the new update is avaialble pops up.
One time it backs to life after like more than 1 minute, other locks I waited like 3 mintues and have to press the reboot button.
I wonder what could be wrong here, could be hardware support? My hardware is many years old should be mature support anyway.
In windows 10, also archlinux, I do not have any issues for a year.
Here's some of the hardware:
Code: Select all
System:
Host: b450aoruspro Kernel: 6.11.2-zen3-xanmod1-1-bore arch: x86_64 bits: 64
Desktop: Xfce v: 4.18.1 Distro: Artix Linux
Machine:
Type: Desktop System: Gigabyte product: B450 AORUS PRO v: N/A serial: N/A
Mobo: Gigabyte model: B450 AORUS PRO-CF serial: N/A UEFI: American
Megatrends LLC. v: F66b date: 07/11/2024
CPU:
Info: 8-core AMD Ryzen 7 5800X [MCP] speed (MHz): avg: 3610
min/max: 550/4851
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX
470/480/570/570X/580/580X/590] driver: amdgpu v: kernel
Device-2: DisplayLink USB3.0 Dual Video Dock driver: cdc_ncm,snd-usb-audio
type: USB
Display: x11 server: X.org v: 1.21.1.13 driver: X: loaded: amdgpu
unloaded: modesetting failed: fbdev,vesa dri: radeonsi gpu: amdgpu
resolution: <missing: xdpyinfo/xrandr> resolution: 3840x2160
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Network:
Device-1: Intel I211 Gigabit Network driver: igb
Drives:
Local Storage: total: 476.95 GiB used: 23.12 GiB (4.8%)
Info:
Memory: total: 16 GiB available: 15.54 GiB used: 2.54 GiB (16.4%)
Processes: 281 Uptime: 20m Shell: Sudo pinxi: 3.3.36-4
I did enable Ryzen's PBO auto overclock in BIOS, but it is completely fine in windows and linux.
The USB3.0 Dock hub should not be the problem, because I have a second mouse connected directly to the motherboard, when lock up happens, both mouse lost response, keyboard completely dead no cap on off.
Memory is running in XMP profile, but is in single channel mode, only in memory channel A, not memory channel B, because my ryzen cpu lost some pins in channel B so it can no longer run anything in channel B or dual channel setup. However this is fine in both windows and linux.
Is there anything I can look into to troubleshooting?
Update:
(I can't reply to this topic at all, but I realize I can edit my post here.
see can't reply issue for the forum
https://forums.ghostbsd.org/viewtopic.php?f=91&t=2819
)
tried some troubleshooting.
Hi it turns out it is the USB driver issue. Both my USB hub and on motherboard board usb seems to have issues.
my motherboard is gigabyte B450 AORUS PRO with up to date BIOS.
Here's the USB3.0 usb drive I use disconnect and replug,
when in linux disconnect and replug in,
on board usb ports seems to lost response for me for only once,
but the on board usb port also gives me very low write speed like USB2.0 speed only 18MB/s,
while in Linux I get write speed of full which is around 100MB/s
USB HUB lost response much more often.
Since its driver hardware support issue, I'm not sure there's anything I can do.
Code: Select all
[ 70.741535] usb 2-3: USB disconnect, device number 3
[ 70.769439] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[ 70.769465] sd 8:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 84.612754] usb 2-3: new SuperSpeed USB device number 5 using xhci_hcd
[ 84.635603] usb 2-3: New USB device found, idVendor=8564, idProduct=1000, bcdDevice=11.00
[ 84.635609] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 84.635611] usb 2-3: Product: zhenJBfast
[ 84.635613] usb 2-3: Manufacturer: Legend
[ 84.635615] usb 2-3: SerialNumber: 201807P0002F5U7P1ZW
[ 84.647412] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 84.647627] scsi host8: usb-storage 2-3:1.0
[ 85.940548] scsi 8:0:0:0: Direct-Access Legend zhenJBfast 1100 PQ: 0 ANSI: 6
[ 85.940780] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 85.942960] sd 8:0:0:0: [sdc] 62455808 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 85.943370] sd 8:0:0:0: [sdc] Write Protect is off
[ 85.943372] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 85.943755] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 85.950023] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 85.950024] GPT:5429419 != 62455807
[ 85.950026] GPT:Alternate GPT header not at the end of the disk.
[ 85.950027] GPT:5429419 != 62455807
[ 85.950028] GPT: Use GNU Parted to correct GPT errors.
[ 85.950031] sdc: sdc1 sdc2
[ 85.950406] sd 8:0:0:0: [sdc] Attached SCSI removable disk
even in live desktop installer those lost response.
Code: Select all
[ 369.341223] usb 2-2: USB disconnect, device number 2
[ 369.341228] usb 2-2.1: USB disconnect, device number 4
[ 369.342273] cdc_ncm 2-2.1:1.5 eth1: unregister 'cdc_ncm' usb-0000:02:00.0-2.1, CDC NCM (SEND ZLP)
[ 370.748559] usb 1-2: USB disconnect, device number 2
[ 370.748564] usb 1-2.4: USB disconnect, device number 3
[ 387.538677] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd
[ 387.795764] usb 2-2: New USB device found, idVendor=2109, idProduct=8110, bcdDevice=90.84
[ 387.795770] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 387.795772] usb 2-2: Product: USB3.0 Hub
[ 387.795774] usb 2-2: Manufacturer: VIA Labs, Inc.
[ 387.801801] hub 2-2:1.0: USB hub found
[ 387.802243] hub 2-2:1.0: 4 ports detected
[ 387.968284] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 388.183879] usb 1-2: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.80
[ 388.183884] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 388.183887] usb 1-2: Product: USB2.0 Hub
[ 388.183888] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 388.192238] hub 1-2:1.0: USB hub found
[ 388.194856] hub 1-2:1.0: 4 ports detected
[ 388.524589] usb 1-2.4: new high-speed USB device number 6 using xhci_hcd
[ 388.637881] usb 1-2.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 388.637886] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 388.637889] usb 1-2.4: Product: USB 2.0 Hub
[ 388.645924] hub 1-2.4:1.0: USB hub found
[ 388.648770] hub 1-2.4:1.0: 4 ports detected
[ 389.276752] usb 2-2.1: new SuperSpeed USB device number 7 using xhci_hcd
[ 389.298645] usb 2-2.1: New USB device found, idVendor=17e9, idProduct=4307, bcdDevice=35.06
[ 389.298651] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 389.298654] usb 2-2.1: Product: USB3.0 Dual Video Dock
[ 389.298655] usb 2-2.1: Manufacturer: DisplayLink
[ 389.298657] usb 2-2.1: SerialNumber: 000800110041907
[ 389.369785] usb 2-2.1: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[ 389.369788] usb 2-2.1: [15] FU [DisplayLink Audio Playback Volume] ch = 6, val = -8176/0/16
[ 389.377783] usb 2-2.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong.
[ 389.377785] usb 2-2.1: [12] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16
[ 389.421286] cdc_ncm 2-2.1:1.5: MAC-Address: 00:50:b6:e0:34:2b
[ 389.421289] cdc_ncm 2-2.1:1.5: setting rx_max = 16384
[ 389.422285] cdc_ncm 2-2.1:1.5: setting tx_max = 16384
[ 389.422463] cdc_ncm 2-2.1:1.5 eth1: register 'cdc_ncm' at usb-0000:02:00.0-2.1, CDC NCM (SEND ZLP), 00:50:b6:e0:34:2b
Code: Select all
ugen0.2: <VIA Labs, Inc. USB3.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.84, addr 1> on usbus0
ums0 on uhub0
ums0: <vendor 0x2b89 UGREEN Mouse, class 0/0, rev 1.10/2.00, addr 1> on usbus1
ums0: 8 buttons and [XYZT] coordinates ID=2
uhub2: 4 ports with 2 removable, self powered
ugen0.3: <DisplayLink USB3.0 Dual Video Dock> at usbus0
uaudio0 on uhub2
uaudio0: <DisplayLink USB3.0 Dual Video Dock, class 239/2, rev 3.20/35.06, addr 2> on usbus0
uaudio0: Play[0]: 48000 Hz, 6 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected)
uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected)
uaudio0: No MIDI sequencer.
pcm9 on uaudio0
uaudio0: No HID volume keys found.
cdce0 on uhub2
cdce0: <DisplayLink USB3.0 Dual Video Dock, class 239/2, rev 3.20/35.06, addr 2> on usbus0
ue0: <USB Ethernet> on cdce0
ue0: Ethernet address: 00:50:b6:e0:34:2b
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.80, addr 3> on usbus0
uhub3: 4 ports with 2 removable, self powered
ugen0.5: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub4 on uhub3
uhub4: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 4> on usbus0
igb0: link state changed to UP
uhub4: 4 ports with 4 removable, self powered
ugen0.6: <Broadcom Remote Download Wireless Adapter> at usbus0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
Security policy loaded: MAC/ntpd (mac_ntpd)
usb_dev_suspend_peer: Setting device remote wakeup failed
usb_dev_suspend_peer: Suspending port failed
uhub4: at uhub3, port 4, addr 4 (disconnected)
uhub4: detached
usbd_req_re_enumerate: addr=4, port reset failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=4, port reset failed, USB_ERR_TIMEOUT
usb_dev_suspend_peer: Setting device remote wakeup failed
usb_dev_resume_peer: Clearing device remote wakeup failed: USB_ERR_TIMEOUT
uhub3: at uhub1, port 6, addr 3 (disconnected)
ugen0.5: <vendor 0x1a40 USB 2.0 Hub> at usbus0 (disconnected)
uhub3: detached
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT
ugen0.2: <VIA Labs, Inc. USB3.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 1 (disconnected)
ugen0.3: <DisplayLink USB3.0 Dual Video Dock> at usbus0 (disconnected)
uaudio0: at uhub2, port 1, addr 2 (disconnected)
pcm9: detached
uaudio0: detached
cdce0: at uhub2, port 1, addr 2 (disconnected)
cdce0: detached
uhub2: detached
[b][here I tried to disconnect and replug in the USB HUB][/b]
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 6 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected)
[here I tried to disconnect and replug in the USB HUB]
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.4: <VIA Labs, Inc. USB2.0 Hub> at usbus0 (disconnected)
[here I tried to disconnect and replug in the USB HUB]
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 7 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
[here I tried to disconnect and replug my USB 3.0 pen drive directly onto the motherboard USB port and its same error ]
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
ugen0.2: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
